From 80ea1ff5b326a5c4041fecd9408cf966a514096e Mon Sep 17 00:00:00 2001
From: zqlit <imql@qq.com>
Date: Thu, 1 Oct 2026 16:47:05 +0800
Subject: [PATCH] =?UTF-8?q?fix(ci):=20=E5=88=A0=E9=99=A4=E7=A9=BA=E5=A3=B3?=
 =?UTF-8?q?=20deploy-upyun=20job=EF=BC=8CUpYun=20=E7=9B=B4=E4=BC=A0?=
 =?UTF-8?q?=E6=94=B9=E4=B8=BA=E5=A6=82=E5=AE=9E=E4=B8=8A=E6=8A=A5=E4=B8=89?=
 =?UTF-8?q?=E6=80=81?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

deploy-upyun 是零上传动作的空壳 job，却无条件打印「UpYun 已同步最新内容」，其输出被 Telegram / 飞书 / 邮件通知当成 UpYun 部署成功的依据；真正的上传步骤标了 continue-on-error，失败也不影响 job 颜色。三层叠加，导致 7/25 起国内线路停更两个多月而通知始终显示成功。

改动：删除 deploy-upyun（finalize / notify-failure 的 needs 同步清理）；Upload to UpYun 在退出时写 GITHUB_OUTPUT，如实上报 success / failure / skipped 三态与真实耗时（不用 steps.outcome，只依赖最通用的 output 传递）；通知与 Step Summary 改为展示三态真实结果，移除「文件已在 Build 阶段同步」这类未经验证的说法。

又拍云直传失败仍不阻断流水线 —— 国内线路由腾讯云广州的 1Panel 计划任务「又拍云同步(国内中转)」每分钟兜底增量推送。
---
 .github/workflows/deploy.yml | 172 ++++++++++++++---------------------
 1 file changed, 70 insertions(+), 102 deletions(-)

diff --git a/.github/workflows/deploy.yml b/.github/workflows/deploy.yml
index afaf9579..2c8e117c 100644
--- a/.github/workflows/deploy.yml
+++ b/.github/workflows/deploy.yml
@@ -126,8 +126,13 @@ jobs:
       duration: ${{ steps.end-build.outputs.duration }}
       file_count: ${{ steps.stats.outputs.file_count }}
       total_size: ${{ steps.stats.outputs.total_size }}
-      skipped: ${{ steps.upload.outputs.skipped || steps.set-skipped.outputs.skipped }}
       need_upload: ${{ steps.check-upload.outputs.need_upload }}
+      # Upload to UpYun 的真实三态：success / failure / skipped（未执行）。
+      # 该步骤标了 continue-on-error，conclusion 恒为 success，不能用来判断成败。
+      # 这里刻意不用 steps.<id>.outcome，而是让步骤自己在退出时写 GITHUB_OUTPUT，
+      # 只依赖最通用的 output 传递机制，GitHub / Gitea 两边都稳。
+      upyun_status: ${{ steps.upload.outputs.upyun_status || 'skipped' }}
+      upyun_duration: ${{ steps.upload.outputs.duration }}
     needs: pre-check
     if: needs.pre-check.outputs.can_deploy == 'true'
 
@@ -291,9 +296,25 @@ jobs:
         UPYUN_OPERATOR: ${{ secrets.UPYUN_OPERATOR }}
         UPYUN_PASSWORD: ${{ secrets.UPYUN_PASSWORD }}
       id: upload
+      # 直传失败不阻断整条流水线 —— 国内线路已由腾讯云广州的中转机兜底
+      # （1Panel 计划任务「又拍云同步(国内中转)」每分钟比对 COS 上的 build hash，
+      #   有变化才增量推送）。但失败必须被如实上报，绝不能再伪装成成功。
       continue-on-error: true
       run: |
         echo "📤 上传构建产物到 UpYun..."
+        START_TS=$(date +%s)
+        # 无论成功、失败还是中途退出，都在退出时如实上报结果与耗时。
+        # 这是"不再假绿"的核心：过去无论传没传上去，通知都显示成功。
+        on_exit() {
+          rc=$?
+          if [ "$rc" -eq 0 ]; then
+            echo "upyun_status=success" >> $GITHUB_OUTPUT
+          else
+            echo "upyun_status=failure" >> $GITHUB_OUTPUT
+          fi
+          echo "duration=$(($(date +%s) - START_TS))" >> $GITHUB_OUTPUT
+        }
+        trap on_exit EXIT
 
         UPX_VERSION="0.4.9"
         UPX_BIN="/tmp/upyun-upx"
@@ -340,12 +361,6 @@ jobs:
         timeout 480 "$UPX_BIN" sync public/ / -w 10 --delete --strong
         timeout 30 "$UPX_BIN" put public/.build_hash /__build_hash
         echo "✅ UpYun 上传完成"
-        echo "skipped=false" >> $GITHUB_OUTPUT
-
-    - name: Set skipped status
-      if: steps.check-upload.outputs.need_upload == 'false'
-      id: set-skipped
-      run: echo "skipped=true" >> $GITHUB_OUTPUT
 
     - name: Push Image Optimizations
       continue-on-error: true
@@ -504,58 +519,12 @@ jobs:
         fi
 
   # ============================================================
-  # Job 4: Deploy to UpYun (并行)
+  # 注意：这里原先有一个名为 deploy-upyun 的 job —— 它是纯空壳：
+  # 零上传动作，却无条件打印「UpYun 已同步最新内容」，且它的输出被
+  # Telegram / 飞书 / 邮件通知当成"UpYun 部署成功"的依据。
+  # 因它持续掩盖真实故障（7/25 起国内线路停更两个多月），已于 2026-10-01 删除。
+  # 又拍云的真实状态现在来自 build job 的 upyun_status 输出。
   # ============================================================
-  deploy-upyun:
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    permissions:
-      contents: read
-    needs: build
-    outputs:
-      deployed: ${{ steps.check.outputs.deployed }}
-      duration: ${{ steps.end-upyun.outputs.duration }}
-
-    steps:
-    - name: Start timing
-      id: start-upyun
-      run: echo "start_time=$(date +%s)" >> $GITHUB_OUTPUT
-
-    - name: Check if deployment is needed
-      id: check
-      run: |
-        CURRENT_HASH="${{ needs.build.outputs.build_hash }}"
-        LAST_HASH="${{ needs.build.outputs.last_hash }}"
-
-        echo "当前 build_hash: $CURRENT_HASH"
-        echo "上次部署 hash: $LAST_HASH"
-
-        if [ -z "$LAST_HASH" ] || [ "$CURRENT_HASH" != "$LAST_HASH" ]; then
-          echo "🔄 构建产物有变化，UpYun 已同步最新内容"
-          echo "deployed=true" >> $GITHUB_OUTPUT
-        else
-          echo "✅ 构建产物无变化，UpYun 无需更新"
-          echo "deployed=false" >> $GITHUB_OUTPUT
-        fi
-
-    - name: End timing
-      id: end-upyun
-      run: |
-        end_time=$(date +%s)
-        total_start_time=${{ steps.start-upyun.outputs.start_time }}
-        total_duration=$((end_time - total_start_time))
-        echo "duration=${total_duration}" >> $GITHUB_OUTPUT
-        
-        if [ "${{ steps.check.outputs.deployed }}" = "true" ]; then
-          echo "## ⏱️ Deploy UpYun 耗时: ${total_duration}秒" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "### 📊 部署统计" >> $GITHUB_STEP_SUMMARY
-          echo "- **文件总数**: ${{ needs.build.outputs.file_count }}" >> $GITHUB_STEP_SUMMARY
-          echo "- **总大小**: ${{ needs.build.outputs.total_size }}" >> $GITHUB_STEP_SUMMARY
-        else
-          echo "## UpYun 部署已跳过（构建产物无变化）" >> $GITHUB_STEP_SUMMARY
-          echo "总耗时: ${total_duration}秒" >> $GITHUB_STEP_SUMMARY
-        fi
 
   # ============================================================
   # Job 5: CDN Refresh & Notifications (after all deployments)
@@ -565,8 +534,8 @@ jobs:
     timeout-minutes: 5
     permissions:
       contents: write
-    needs: [pre-check, build, deploy-edgeone, deploy-upyun]
-    if: always() && needs.build.result == 'success' && needs.deploy-edgeone.result == 'success' && needs.deploy-upyun.result == 'success'
+    needs: [pre-check, build, deploy-edgeone]
+    if: always() && needs.build.result == 'success' && needs.deploy-edgeone.result == 'success'
 
     steps:
     - name: Start timing
@@ -584,12 +553,12 @@ jobs:
       id: deploy-status
       run: |
         EDGEONE_DEPLOYED="${{ needs.deploy-edgeone.outputs.deployed }}"
-        UPYUN_DEPLOYED="${{ needs.deploy-upyun.outputs.deployed }}"
+        UPYUN_STATUS="${{ needs.build.outputs.upyun_status }}"
         
         echo "EdgeOne deployed: $EDGEONE_DEPLOYED"
-        echo "UpYun deployed: $UPYUN_DEPLOYED"
+        echo "UpYun status: $UPYUN_STATUS"
         
-        if [ "$EDGEONE_DEPLOYED" = "true" ] || [ "$UPYUN_DEPLOYED" = "true" ]; then
+        if [ "$EDGEONE_DEPLOYED" = "true" ] || [ "$UPYUN_STATUS" = "success" ]; then
           echo "any_deployed=true" >> $GITHUB_OUTPUT
         else
           echo "any_deployed=false" >> $GITHUB_OUTPUT
@@ -684,8 +653,8 @@ jobs:
         BUILD_DUR="${{ needs.build.outputs.duration }}"
         EDGEONE_DUR="${{ needs.deploy-edgeone.outputs.duration }}"
         EDGEONE_DEPLOYED="${{ needs.deploy-edgeone.outputs.deployed }}"
-        UPYUN_DUR="${{ needs.deploy-upyun.outputs.duration }}"
-        UPYUN_DEPLOYED="${{ needs.deploy-upyun.outputs.deployed }}"
+        UPYUN_DUR="${{ needs.build.outputs.upyun_duration }}"
+        UPYUN_STATUS_RAW="${{ needs.build.outputs.upyun_status }}"
         FILE_COUNT="${{ needs.build.outputs.file_count }}"
         TOTAL_SIZE="${{ needs.build.outputs.total_size }}"
 
@@ -696,10 +665,14 @@ jobs:
           EDGEONE_DETAIL=$(printf "\n    📥 下载: %ss\n    📤 上传: %ss" "$EDGEONE_DOWNLOAD" "$EDGEONE_UPLOAD")
         fi
 
-        UPYUN_DETAIL=""
-        if [ "$UPYUN_DEPLOYED" = "true" ]; then
-          UPYUN_DETAIL=$(printf "\n    (文件已在 Build 阶段同步)")
-        fi
+        # 三态映射：直传结果如实呈现，不再有"文件已在 Build 阶段同步"这种没验证过的说辞
+        case "$UPYUN_STATUS_RAW" in
+          success) UPYUN_TEXT="✅ 已直传";;
+          failure) UPYUN_TEXT="❌ 直传失败（国内中转机兜底）";;
+          skipped) UPYUN_TEXT="⏭️ 跳过（无变化）";;
+          *)       UPYUN_TEXT="❔ 未执行";;
+        esac
+        if [ -n "$UPYUN_DUR" ]; then UPYUN_DUR_TEXT="${UPYUN_DUR}s"; else UPYUN_DUR_TEXT="—"; fi
 
         if [ "${{ steps.deploy-status.outputs.any_deployed }}" = "true" ]; then
           STATUS_ICON="🎉"
@@ -710,7 +683,6 @@ jobs:
         fi
 
         EDGEONE_STATUS=$([ "$EDGEONE_DEPLOYED" = "true" ] && echo "✅ 已部署" || echo "⏭️ 跳过")
-        UPYUN_STATUS=$([ "$UPYUN_DEPLOYED" = "true" ] && echo "✅ 已部署" || echo "⏭️ 跳过")
 
         CURRENT_TIME=$(date +'%Y-%m-%d %H:%M:%S')
 
@@ -732,12 +704,12 @@ jobs:
         MESSAGE="$MESSAGE""🔍 Pre-check: ${PRECHECK_DUR}s"$'\n'
         MESSAGE="$MESSAGE""🏗️ Build: ${BUILD_DUR}s"$'\n'
         MESSAGE="$MESSAGE""🌐 EdgeOne: ${EDGEONE_DUR}s$EDGEONE_DETAIL"$'\n'
-        MESSAGE="$MESSAGE""☁️ UpYun: ${UPYUN_DUR}s$UPYUN_DETAIL"$'\n\n'
+        MESSAGE="$MESSAGE""☁️ UpYun 直传: ${UPYUN_DUR_TEXT}"$'\n\n'
         MESSAGE="$MESSAGE""━━━━━━━━━━━━━━━━━━━━━━"$'\n'
         MESSAGE="$MESSAGE""📌 *部署状态*"$'\n'
         MESSAGE="$MESSAGE""━━━━━━━━━━━━━━━━━━━━━━"$'\n'
         MESSAGE="$MESSAGE""🌐 EdgeOne Pages: $EDGEONE_STATUS"$'\n'
-        MESSAGE="$MESSAGE""☁️ UpYun: $UPYUN_STATUS"$'\n\n'
+        MESSAGE="$MESSAGE""☁️ UpYun: $UPYUN_TEXT"$'\n\n'
         if [ "${{ github.server_url }}" = "https://github.com" ]; then
           RUN_URL="https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}"
         else
@@ -764,8 +736,8 @@ jobs:
         BUILD_DUR="${{ needs.build.outputs.duration }}"
         EDGEONE_DUR="${{ needs.deploy-edgeone.outputs.duration }}"
         EDGEONE_DEPLOYED="${{ needs.deploy-edgeone.outputs.deployed }}"
-        UPYUN_DUR="${{ needs.deploy-upyun.outputs.duration }}"
-        UPYUN_DEPLOYED="${{ needs.deploy-upyun.outputs.deployed }}"
+        UPYUN_DUR="${{ needs.build.outputs.upyun_duration }}"
+        UPYUN_STATUS_RAW="${{ needs.build.outputs.upyun_status }}"
         FILE_COUNT="${{ needs.build.outputs.file_count }}"
         TOTAL_SIZE="${{ needs.build.outputs.total_size }}"
 
@@ -776,10 +748,14 @@ jobs:
           EDGEONE_DETAIL=$(printf "\n    📥 下载: %ss\n    📤 上传: %ss" "$EDGEONE_DOWNLOAD" "$EDGEONE_UPLOAD")
         fi
 
-        UPYUN_DETAIL=""
-        if [ "$UPYUN_DEPLOYED" = "true" ]; then
-          UPYUN_DETAIL=$(printf "\n    (文件已在 Build 阶段同步)")
-        fi
+        # 三态映射：直传结果如实呈现，不再有"文件已在 Build 阶段同步"这种没验证过的说辞
+        case "$UPYUN_STATUS_RAW" in
+          success) UPYUN_TEXT="✅ 已直传";;
+          failure) UPYUN_TEXT="❌ 直传失败（国内中转机兜底）";;
+          skipped) UPYUN_TEXT="⏭️ 跳过（无变化）";;
+          *)       UPYUN_TEXT="❔ 未执行";;
+        esac
+        if [ -n "$UPYUN_DUR" ]; then UPYUN_DUR_TEXT="${UPYUN_DUR}s"; else UPYUN_DUR_TEXT="—"; fi
 
         if [ "${{ steps.deploy-status.outputs.any_deployed }}" = "true" ]; then
           STATUS_ICON="🎉"
@@ -790,7 +766,6 @@ jobs:
         fi
 
         EDGEONE_STATUS=$([ "$EDGEONE_DEPLOYED" = "true" ] && echo "✅ 已部署" || echo "⏭️ 跳过")
-        UPYUN_STATUS=$([ "$UPYUN_DEPLOYED" = "true" ] && echo "✅ 已部署" || echo "⏭️ 跳过")
 
         CURRENT_TIME=$(date +'%Y-%m-%d %H:%M:%S')
 
@@ -812,12 +787,12 @@ jobs:
         MESSAGE_TEXT="$MESSAGE_TEXT""🔍 Pre-check: ${PRECHECK_DUR}s"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""🏗️ Build: ${BUILD_DUR}s"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""🌐 EdgeOne: ${EDGEONE_DUR}s$EDGEONE_DETAIL"$'\n'
-        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ UpYun: ${UPYUN_DUR}s$UPYUN_DETAIL"$'\n\n'
+        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ UpYun 直传: ${UPYUN_DUR_TEXT}"$'\n\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""━━━━━━━━━━━━━━━━━━━━━━"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""📌 部署状态"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""━━━━━━━━━━━━━━━━━━━━━━"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""🌐 EdgeOne Pages: $EDGEONE_STATUS"$'\n'
-        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ UpYun: $UPYUN_STATUS"$'\n\n'
+        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ UpYun: $UPYUN_TEXT"$'\n\n'
         if [ "${{ github.server_url }}" = "https://github.com" ]; then
           RUN_URL="https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}"
         else
@@ -877,12 +852,12 @@ jobs:
               📥 下载 COS: ${{ needs.deploy-edgeone.outputs.download_duration }}s
               📤 上传部署: ${{ needs.deploy-edgeone.outputs.upload_duration }}s
 
-            ☁️ UpYun: ${{ needs.deploy-upyun.outputs.duration }}s
+            ☁️ UpYun 直传: ${{ needs.build.outputs.upyun_status == 'success' && '✅ 成功' || (needs.build.outputs.upyun_status == 'skipped' && '⏭️ 跳过（无变化）' || '❌ 失败（国内中转机兜底）') }}
 
           📌 部署状态
           ──────────────────────────────────
             🌐 EdgeOne Pages: ${{ needs.deploy-edgeone.outputs.deployed == 'true' && '✅ 已部署' || '⏭️ 跳过（无变化）' }}
-            ☁️ UpYun: ${{ needs.deploy-upyun.outputs.deployed == 'true' && '✅ 已部署' || '⏭️ 跳过（无变化）' }}
+            ☁️ UpYun: ${{ needs.build.outputs.upyun_status == 'success' && '✅ 已直传' || (needs.build.outputs.upyun_status == 'skipped' && '⏭️ 跳过（无变化）' || '❌ 直传失败（中转机兜底）') }}
 
           🔗 查看详情
           ──────────────────────────────────
@@ -901,8 +876,7 @@ jobs:
         BUILD_DUR="${{ needs.build.outputs.duration }}"
         EDGEONE_DUR="${{ needs.deploy-edgeone.outputs.duration }}"
         EDGEONE_DEPLOYED="${{ needs.deploy-edgeone.outputs.deployed }}"
-        UPYUN_DUR="${{ needs.deploy-upyun.outputs.duration }}"
-        UPYUN_DEPLOYED="${{ needs.deploy-upyun.outputs.deployed }}"
+        UPYUN_DUR="${{ needs.build.outputs.upyun_duration }}"
 
         if [ "$EDGEONE_DEPLOYED" = "true" ]; then
           EDGEONE_DOWNLOAD="${{ needs.deploy-edgeone.outputs.download_duration }}"
@@ -912,13 +886,7 @@ jobs:
           EDGEONE_UPLOAD="0"
         fi
 
-        if [ "$UPYUN_DEPLOYED" = "true" ]; then
-          UPYUN_DOWNLOAD="0"
-          UPYUN_UPLOAD="0"
-        else
-          UPYUN_DOWNLOAD="0"
-          UPYUN_UPLOAD="0"
-        fi
+        UPYUN_DUR_CELL="${UPYUN_DUR}s"; [ -z "$UPYUN_DUR" ] && UPYUN_DUR_CELL="—"
 
         echo "## 📊 部署报告" >> $GITHUB_STEP_SUMMARY
         echo "" >> $GITHUB_STEP_SUMMARY
@@ -938,7 +906,7 @@ jobs:
         echo "| Pre-check | ${PRECHECK_DUR}s | - | - |" >> $GITHUB_STEP_SUMMARY
         echo "| Build | ${BUILD_DUR}s | - | - |" >> $GITHUB_STEP_SUMMARY
         echo "| EdgeOne | ${EDGEONE_DUR}s | ${EDGEONE_DOWNLOAD}s | ${EDGEONE_UPLOAD}s |" >> $GITHUB_STEP_SUMMARY
-        echo "| UpYun | ${UPYUN_DUR}s | ${UPYUN_DOWNLOAD}s | ${UPYUN_UPLOAD}s |" >> $GITHUB_STEP_SUMMARY
+        echo "| UpYun 直传 | ${UPYUN_DUR_CELL} | - | ${UPYUN_DUR_CELL} |" >> $GITHUB_STEP_SUMMARY
         echo "| Finalize | ${finalize_duration}s | - | - |" >> $GITHUB_STEP_SUMMARY
         echo "" >> $GITHUB_STEP_SUMMARY
 
@@ -947,7 +915,7 @@ jobs:
         echo "| 目标 | 状态 |" >> $GITHUB_STEP_SUMMARY
         echo "|------|------|" >> $GITHUB_STEP_SUMMARY
         echo "| EdgeOne Pages | ${{ needs.deploy-edgeone.outputs.deployed == 'true' && '✅ 已部署' || '⏭️ 跳过（无变化）' }} |" >> $GITHUB_STEP_SUMMARY
-        echo "| UpYun | ${{ needs.deploy-upyun.outputs.deployed == 'true' && '✅ 已部署' || '⏭️ 跳过（无变化）' }} |" >> $GITHUB_STEP_SUMMARY
+        echo "| UpYun 直传 | ${{ needs.build.outputs.upyun_status == 'success' && '✅ 成功' || (needs.build.outputs.upyun_status == 'skipped' && '⏭️ 跳过（无变化）' || '❌ 失败（中转机兜底）') }} |" >> $GITHUB_STEP_SUMMARY
         echo "| CDN 刷新 | ${{ steps.deploy-status.outputs.any_deployed == 'true' && '✅ 已刷新' || '⏭️ 跳过' }} |" >> $GITHUB_STEP_SUMMARY
 
   # ============================================================
@@ -958,8 +926,8 @@ jobs:
     timeout-minutes: 3
     permissions:
       contents: read
-    needs: [pre-check, build, deploy-edgeone, deploy-upyun, finalize]
-    if: always() && (needs.pre-check.result == 'failure' || needs.build.result == 'failure' || needs.deploy-edgeone.result == 'failure' || needs.deploy-upyun.result == 'failure' || needs.finalize.result == 'failure')
+    needs: [pre-check, build, deploy-edgeone, finalize]
+    if: always() && (needs.pre-check.result == 'failure' || needs.build.result == 'failure' || needs.deploy-edgeone.result == 'failure' || needs.finalize.result == 'failure')
     
     steps:
     - name: Send Telegram failure notification
@@ -976,13 +944,13 @@ jobs:
         if [ "${{ needs.pre-check.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Pre-check" "$FAILURES"); fi
         if [ "${{ needs.build.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Build" "$FAILURES"); fi
         if [ "${{ needs.deploy-edgeone.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Deploy EdgeOne" "$FAILURES"); fi
-        if [ "${{ needs.deploy-upyun.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Deploy UpYun" "$FAILURES"); fi
+        if [ "${{ needs.build.outputs.upyun_status }}" = "failure" ]; then FAILURES=$(printf "%s\n  ⚠️ UpYun 直传失败（不阻断，国内中转机兜底）" "$FAILURES"); fi
         if [ "${{ needs.finalize.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Finalize" "$FAILURES"); fi
 
         PRECHECK_STATUS=$([ "${{ needs.pre-check.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.pre-check.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
         BUILD_STATUS=$([ "${{ needs.build.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.build.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
         EDGEONE_STATUS=$([ "${{ needs.deploy-edgeone.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.deploy-edgeone.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
-        UPYUN_STATUS=$([ "${{ needs.deploy-upyun.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.deploy-upyun.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
+        UPYUN_STATUS=$([ "${{ needs.build.outputs.upyun_status }}" = "success" ] && echo "✅ 直传成功" || ([ "${{ needs.build.outputs.upyun_status }}" = "failure" ] && echo "❌ 直传失败（中转兜底）" || echo "⏭️ 跳过（无变化）"))
         FINALIZE_STATUS=$([ "${{ needs.finalize.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.finalize.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
 
         CURRENT_TIME=$(date +'%Y-%m-%d %H:%M:%S')
@@ -1003,7 +971,7 @@ jobs:
         MESSAGE="$MESSAGE""🔍 Pre-check: $PRECHECK_STATUS"$'\n'
         MESSAGE="$MESSAGE""🏗️ Build: $BUILD_STATUS"$'\n'
         MESSAGE="$MESSAGE""🌐 Deploy EdgeOne: $EDGEONE_STATUS"$'\n'
-        MESSAGE="$MESSAGE""☁️ Deploy UpYun: $UPYUN_STATUS"$'\n'
+        MESSAGE="$MESSAGE""☁️ UpYun 直传: $UPYUN_STATUS"$'\n'
         MESSAGE="$MESSAGE""📤 Finalize: $FINALIZE_STATUS"$'\n\n'
         if [ "${{ github.server_url }}" = "https://github.com" ]; then
           RUN_URL="https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}"
@@ -1031,13 +999,13 @@ jobs:
         if [ "${{ needs.pre-check.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Pre-check" "$FAILURES"); fi
         if [ "${{ needs.build.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Build" "$FAILURES"); fi
         if [ "${{ needs.deploy-edgeone.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Deploy EdgeOne" "$FAILURES"); fi
-        if [ "${{ needs.deploy-upyun.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Deploy UpYun" "$FAILURES"); fi
+        if [ "${{ needs.build.outputs.upyun_status }}" = "failure" ]; then FAILURES=$(printf "%s\n  ⚠️ UpYun 直传失败（不阻断，国内中转机兜底）" "$FAILURES"); fi
         if [ "${{ needs.finalize.result }}" = "failure" ]; then FAILURES=$(printf "%s\n  🔴 Finalize" "$FAILURES"); fi
 
         PRECHECK_STATUS=$([ "${{ needs.pre-check.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.pre-check.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
         BUILD_STATUS=$([ "${{ needs.build.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.build.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
         EDGEONE_STATUS=$([ "${{ needs.deploy-edgeone.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.deploy-edgeone.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
-        UPYUN_STATUS=$([ "${{ needs.deploy-upyun.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.deploy-upyun.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
+        UPYUN_STATUS=$([ "${{ needs.build.outputs.upyun_status }}" = "success" ] && echo "✅ 直传成功" || ([ "${{ needs.build.outputs.upyun_status }}" = "failure" ] && echo "❌ 直传失败（中转兜底）" || echo "⏭️ 跳过（无变化）"))
         FINALIZE_STATUS=$([ "${{ needs.finalize.result }}" = "success" ] && echo "✅ 成功" || ([ "${{ needs.finalize.result }}" = "failure" ] && echo "❌ 失败" || echo "⏭️ 跳过"))
 
         CURRENT_TIME=$(date +'%Y-%m-%d %H:%M:%S')
@@ -1058,7 +1026,7 @@ jobs:
         MESSAGE_TEXT="$MESSAGE_TEXT""🔍 Pre-check: $PRECHECK_STATUS"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""🏗️ Build: $BUILD_STATUS"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""🌐 Deploy EdgeOne: $EDGEONE_STATUS"$'\n'
-        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ Deploy UpYun: $UPYUN_STATUS"$'\n'
+        MESSAGE_TEXT="$MESSAGE_TEXT""☁️ UpYun 直传: $UPYUN_STATUS"$'\n'
         MESSAGE_TEXT="$MESSAGE_TEXT""📤 Finalize: $FINALIZE_STATUS"$'\n\n'
         if [ "${{ github.server_url }}" = "https://github.com" ]; then
           RUN_URL="https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}"